본문으로 바로가기

A material R&D brand by OSLLO

Boards made from worn clothes and offcuts

Slownell is a fibre board made from collected clothing and industrial textile waste, fused with low-melt fibre (LMF) under heat. We're looking for projects to test it with, from furniture and fixtures to interiors.

1000×1000 1000×2000 1000×2400
Sizesmm
Denim Blue · prototype Violet Fleck · prototype Deep Violet · prototype
Denim Blueprototype · surface close-up

Surface

A surface that shows every fleck

The colour and grain of the fibre stay visible on the surface. Tap the three prototype colours to compare.

Prototype colours · working names · colour and pattern vary slightly from lot to lot

More about the material

Uses

From furniture to interiors

We start with furniture and fixtures. Wall and ceiling finishes need a separate fire-retardant treatment to meet each site's requirements.

Edge and surface of a Slownell board
First

Furniture & fixtures

For pop-up fixtures, display units, and furniture tops and sides. We'll work out thickness and finishing with you for each use.

Light grey Slownell boards used as partition walls in a Daewoong Pharmaceutical pop-up set
Pilot project

Pop-up & exhibition sets

Slownell boards formed the partition walls of a short-term Daewoong Pharmaceutical pop-up set, fixed to steel angle frames.

A hand resting on the surface of a Slownell board
After fire-retardant treatment

Wall & ceiling finishes

The standard board is supplied untreated. Where fire retardancy is required, treatment is done separately by a certified contractor, at extra cost and lead time.

See projects

Verified

We list only verified values

Test values come with the lab and date. Items still under test are marked as such.

Density0.86g/cm³
Bending strength32.5MPa
Internal bond strength0.29MPa

KASTI 2025.10Korea Architecture Safety Testing & Research Institute (KASTI) · October 2025 · with reference to KS F 3200:2022 · submitted sample

See full specs

How it's made

From collected clothes to board

OSLLO selects the raw material itself. Boards are made at our plant in Gunpo, Gyeonggi.

  1. 01

    Collect & sort

    Garments that can't be worn again and industrial textile waste are sorted as feedstock.

    Chuncheon, Gangwon · collect & sort
  2. 02

    Shred

    The feedstock is shredded into fibre.

  3. 03

    Heat-fuse

    Blended with low-melt fibre (LMF), the fibre is heat-pressed into a single board. No chemical adhesives are used.

    Gunpo, Gyeonggi · manufacturing
  4. 04

    Cut & finish

    Boards are cut to your drawings; CNC machining and UV printing are available.

Circularity

Wearable clothes go back to the shop. The rest becomes board.

Slownell is made inside OSLLO's clothing loop. OSLLO sorts the feedstock itself.

OSLLO · RE:FIT

Collect & sort

Clothes from people's wardrobes are collected and checked to see whether they can be worn again.

Clothes that can be worn again
OSLLO

Resale

Inspected and sold again in OSLLO stores.

Clothes that can't + industrial textile waste
SLOWNELL

Material

Shredded into fibre and heat-pressed with low-melt fibre into Slownell boards.

How it's made

Estimate

Tell us the thickness and size your project needs

Enter the size and quantity to see how many boards you need and how they're cut, then send your enquiry as it is.